The function of the remote control and the correct operation method for copying it
2023-05-29
At present, copy type remote controls on the market can copy learning code remote controls, fixed code remote controls, and some rolling code remote controls (copy rolling code remote controls require the manufacturer's code to be built-in in the copy type remote control program)
Operation steps for copy type remote control:
1: Clear code: Press and hold any two buttons on the copy type remote control for 10 seconds at the same time. When you see the LED light flashing quickly (about 2 seconds), then slowly (about 1 second), it indicates that the code has been cleared. The LED light of the clear code button should not light up. Note: When pressing and holding down both buttons of the copy type remote control, the LED light does not light up
2: Copy: First place the copied remote control next to the copied remote control (preferably next to the copied remote control), press any key on the copied remote control, the LED light will flash once, and then press the button that the copied remote control wants to copy. When the LED light remains on, it indicates that the code has been copied, and then copy other buttons using the same method. Note: If the copy is not completed within 5S, release the buttons of the copy type remote control and the copied type remote control, and then operate again. For difficult to copy remote controls, you can slide the copied remote control around the copied remote control to find the best copy point. The other key copying methods are the same as above.
Previous: